Milltronics CVCC Manuel d'instructions télécharger pdf (Page 29)

FORMAT

This message may be transmitted from the host to instruct the BIC-II to alter the format of the product

message. (Refer to Product Messages).

Format is automatically reset to "normal" during a BIC-II power up. The alternate Format (when activated)

may be manually reset to "normal" using the RESET message.

The format command should not be used if an AiRanger XPL is connected to the BIC-II.

Transmit the following message from the host to the BIC-II to select Alternate Format.

Data ASCII Example

Field Character Description

SOM STX start of message

BIC-II I.D. 1 BIC-II #1 (e.g.) (range = 1 to 8)

MT 28 format product message

EOM CR end of message

No response is returned to the host as a result of this message.

PRODUCT MODE

The BIC-II Product Mode is factory set to suit AiRanger product messages.

The Product Mode is automatically reset to "AiRanger" during a BIC-II power up. The Product Mode (when

LiquidRanger) may be manually reset to "AiRanger" using the RESET message.

The following message may be transmitted from the host to instruct the BIC-II to process LiquidRanger

product messages. (Refer to Product Messages).

Data ASCII Example

Field Character Description

SOM STX start of message

BIC-II I.D. 1 BIC-II #1

MT 29 the product connected is a LiquidRanger

EOM CR end of message

No response is returned to the host as a result of this message.

PL-371 7 – 5

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 75 76

Pas de commentaire

Milltronics CVCC Manuel d'instructions Page 29