Milltronics CVCC Manuel d'instructions télécharger pdf (Page 12)

PORT 2 BAUD RATE

The CompuScale III TB2 communication port baud rate is

independant of the PORT 1 baud rate, and is set by SW2

contacts 1 and 2. Set the baud as required by the device

connected. The factory setting is 300 baud.

O = switch contact open

C = switch contact closed

LANGUAGE

Leave SW2 contact 3 (SW2-3) in the open position for English, or closed for alternate language,

CompuScale III displays.

REMOTE COMMUNICATION

Leave SW2 contact 6 (SW2-6) open for normal operation. If a remote mounted CompuScale III is used,

SW2-6 of the remote CompuScale III (only) must be closed.

PORT 2 COMMUNICATION MODE

Leave SW2 contact 7 (SW2-7) open for normal operation, or closed if a serial printer is connected to Port 2.

TEST/ADJUST MODE

Leave SW2 contact 8 (SW2-8) in the open position for normal operation. In the closed position, a test menu is

displayed.

When the keypad test is selected, a graphical representation of the keypad is displayed. As each keypad

button is depressed, the display indicates successful operation.

When the display contrast adjustment is selected, pressing "4" increases, and pressing "8" decreases the

display contrast.

95/11/09

Baud SW2

Rate 1 2

300 O O

1200 C O

2400 O C

9600 C C

PL-367 4 – 2

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 58 59

Pas de commentaire

Milltronics CVCC Manuel d'instructions Page 12